Workshop at Norfork General Industries is equipped to produce our customers’ work efficiently and reliably.

Norfork General Industries is equipped to produce our customers’ work efficiently and reliably. Total production area under roof covers nearly 19,000 square feet on three acres. We do complete fabrications, with handrails our specialty, providing quality painting in our own shop. Our material handling and transporting equipment includes tandem axle trucks and a tri-axle truck with a 12 ton x 52’ hydraulic boom crane. Our office is up to date has a large library of professional reference books. See our equipment list for further details and contact us with any questions.



  • One – 2012 Dodge ¾ Ton Diesel 4X4
  • One – 2002 Dodge ¾ Ton Diesel 4X4
  • One – 40’ Flatbed Gooseneck Trailer
  • One – 24’ X 8’ Enclosed Cargo Trailer
  • One – 1974 International 2 Ton tri-axle truck with 12 ton x 52 ft. hydraulic boom crane
Material Handling:
  • One - 2003 Caterpillar 6000 lb. x 14' mast fork lift
  • One – 2001 Mitsubishi 6000 lb. x 14’ mast fork lift
  • One – 1999 Komatsu 5000 lb. x 14’ mast fork lift
  • One – 1984 Hyster 4000 lb. x 15’ mast fork lift
  • Lot – Various material carts
Painting Equipment:
  • One- 10 hp Quincy re-cip painting compressor with dryer
  • One- Ingersall Rand 185 c.f.m. diesel air compressor
  • Two- Clemco 600 lb. sandblasters
  • Two- Smith 225 c.f.m. diesel air compressors
  • Two- NAPA 5 hp electric air compressors
  • Two- Devilbiss pressure paint pots with air driven agitators
  • Lot- Devilbiss and Graco paint guns
  • Lot- Devilbiss 2500 psi airless sprayer
  • Lot- Paint racks and positioners
  • One – 50 hp Gardner Denver electric rotary screw air compressor
Fabricating Equipment:
  • One- Piranha 140 ton dual operator iron worker
  • One- Piranha 120 ton dual operator iron worker
  • Two- Piranha 120 ton single end punch
  • Four- Piranha P-3 50 ton iron workers
  • Two- Everitt 7.5 hp x 14"abrasive mitering cut-off saws, with in-feed conveyors and stops
  • One- Havir 40 ton mechanical punch press One- Verson 20 ton mechanical punch press
  • Three- Arc-Fit pipe coping presses
  • One- Ellis model 2000 miter cut, horizontal band saw 11x17 capacity,with in-feeds and stops
  • One- Ellis model 3000 miter cut, horizontal band saw 12x20 capacity,with in-feeds and stops
  • One- Wellsaw, horizontal band saw, 11x17
  • One- Bader Co. cyl. pipe polishing machine capable of better than #3 polish
  • One– Champion six station polishing machine capable of up to #6 polish
  • One- W.A. Whitney hole puncher
  • One– Summit 5 hp 1 1/4” drilling capacity end mill
  • Two- Milwaukee 1 1/4“ magnetic drill presses
  • One- Black & Decker 11/4” magnetic drill
  • One- Black & Decker magnetic slug cutter
  • Two- Champion forge drill presses, 1/2 and 5/8
  • One– Craftsman 5 hp 4’ metal lathe
  • Eight- Miller 3-phase 250amp DC welding power sources (mig)
  • Eight- Miller model S-52E wire feed units with Bernard and Tweco whips
  • Four- Miller 200 amp Spool-Matic guns
  • Two- Miller model HR-250-1 high frequency units
  • Two- Miller water cooled 300amp tig units
  • Two- Lincoln Ideal Arc AC/DC250 amp stick and tig welding machines
  • Two- Miller model CP-3VS 500amp DC welding power sources
  • One– Miller Plasma Burner,with 3/4” capacity
  • Six- Victor Oxy-Acetylene rigs
  • Two- twenty foot, One thirty foot, two ten foot lay-out fitting tables with1/2” plate steel tops
  • One – Eagle Pyramid angle roll
Please Note:

All of the aforementioned buildings, land, equipment, trucks, etc. are solely owned by Norfork General Industries with no indebtedness. Bank and credit references gladly furnished upon request.

In Memory of the Founders of Norfork General Industries
Joseph R. Davis
1955 - 2006
Davis Brothers Michael L. Davis
1951 - 2013